IR FLAME DETECTORS, SPARK DETECTORS AND THERMAL DETECTORS FOR INDUSTRIAL APPLICATIONS. THE FASTEST AND MOST EFFECTIVE FIRE ALARM DEVICES.
SINCE 1982
Over 40 years of Made in Italy manufacturing.
QUOTES & SUPPORT
Direct access to our engineers. No delays.
ALWAYS IN STOCK
Same-day dispatch, worldwide.
10-YEAR WARRANTY
On all our products, no conditions.
STAND-ALONE
Independent systems. Smarter protection.
IR FLAME DETECTORS, SPARK DETECTORS AND THERMAL DETECTORS FOR INDUSTRIAL APPLICATIONS. THE FASTEST AND MOST EFFECTIVE FIRE ALARM DEVICES.

SPARK DETECTOR SYSTEMS COMPONENTS

HOME > SPARK DETECTORS >  COMPONENTS

RIV-601P/S Spark detector IP66 ATEX II 3D

Detects incandescent bodies flying inside dust collection ducts. It is usually combined with an automatic extinguishing system to extinguish every spark that runs in front of the detector.

Its use is recommended in factories where wood is processed, in textile industry, in cereal and animal feed mills and storage, in the treatment of hides and leather, etc, and where sparks are produced and they can start a fire.
Immediate response time (20-30ms).
Typical sensitivity: 1mm spark at half a meter distance.
“Teletest” feature for remote testing of the detector.
Power supply 24Vdc 50mA.

SAM-871 Mounting frame for spark detector and external test lamp unit

For an easy mounting of spark detector and external test lamp unit over the air duct. Cover with anti-vibration rubber cushions, base with built-in optical window.

APU-874 Air cooling unit

The air purging unit model APU-874 is a mechanical unit designed to keep clean the window of the mounting unit SAM-870 and protect the spark detector RIV-601P/S from the high temperatures of the duct (max 120°C) by means of an air jet. Brass universal 3/8”M air fitting, Parker (female socket and male moving plug for 10 mm pipe).

APU-874G Air purging unit

The air purging unit model APU-874G is a mask in plastic material designed to be applied in front of the spark detector RIV-601P/S mounting unit SAM-871 for application on ducts and conveyors in order to prevent by means of a continuous air jet a dust build-up over the optical window of the mounting unit SAM-871, that could decrease or even blind the detector sensitivity.

PAN-705M Control panel 24Vdc 36W

Designed to operate and monitor all the functions of a system. On front panel it displays the operating state of the system.
MEMORY function: the alarm signaling LEDs of the detectors and of the flow switch “remember” the alarm occurred blinking until the manual reset (RESET). Reverse polarity and overload/short circuit warning lights are also present.
In case of activation of the STOP circuit, the RESET button stops the alarm and restores the normal operating conditions. The TEST button is used to check the system. Cast aluminium case, IP66 protection. Voltage 24Vdc 36W.

PAN-701 Alarm panel 24Vdc 36W

Allows to monitor two independent detection points.
The alarm of the spark detector activates the STOP circuit (it turns on the alarm, stops the fan and closes the duct valve) which is held active until manual reset through the RESET button.

The TEST button is used to check the system.
It carries on the front panels alarm, power, overload/short circuit and reverse polarity lights.
Cast aluminium case, IP66 protection.
Voltage 24Vdc 36W.

PAN-705LOG Control panel with alarm log

Designed to operate and monitor all the functions of a complete spark detection and extinguishing system. The front panel displays the operating state of the spark detectors, water flow switch, STOP function and power supply.

MEMORY function: alarm LEDs of the detectors and flow switch remain blinking until manual RESET. The built-in Alarm Log stores up to 500 events for each detector, flow switch and system test, recording date, time and alarm duration.

The TEST button allows the system to be checked, while the RESET button stops the alarm and restores normal operating conditions. Reverse polarity and overload/short circuit warning lights are also provided.

Cast aluminium case, IP66 protection. 24Vdc power supply, 36W max.

SNA-808L Alarm sounder beacon

Audible visual alarm.

Indoor and outdoor use.
IP65 protection.
Power voltage 24Vdc 110mA

EVS-811 Water solenoid valve ATEX II 3D

Opens water flow to the extinguisher spray nozzle.
Coupling 3/4″ female.
Weatherproof protection with IP65 connector.
Power voltage 24Vdc 12W.

FIL-817 Strainer for water solenoid valve

To be installed upstream of the EVS-811 water solenoid valve in order to filter out impurities present in the water supply, thus preventing clogging or damage to the solenoid valve’s internal diaphragm.

PAC-846 Water flow switch ATEX II 3D

Designed to monitor the spray water flow in the spray nozzle during the extinguishing operation. Installed between the solenoid valve and the spray nozzle, will signal any water leakage due to solenoid valve malfunction. Brass tee coupling 1/2″ female (3/4″ adapters separately supplied). Changeover contact 1A 30Vdc.

UGN-820 Standard spray nozzle

Jam-proof design, vortex type with large outlet diameter (19 mm), usually installed in the spark detector systems. 130° hollow cone jet. Spray at right-angle from water entry. To be mounted at right-angle to spray on center of ductwork. Coupling 3/4″ gas female, case material brass.

UGN-820A Axial spray nozzle

70° hollow cone jet, spray jet in line with water entry.
To be mounted on surface of ductwork.
It is used in applications where it is necessary to avoid bulky in the duct because of the type and the quantity of transported material (eg fibers, paper, leather).
Coupling 3/4″ gas male, case material brass.

UGN-820P Flat jet spray nozzle

90° flat jet, spray jet in line with water entry. To be mounted on surface of ductwork. Used for special applications. Coupling 3/4″ gas male, case material brass. Alimentazione 24Vcc 50mA.

LAM-612P External test lamp unit IP66 ATEX II 3D

Designed to test the RIV-601P/S spark detector window integrity against dust and dirt build-up.
Its use is recommended when internal test cannot be reliable bacause of window being covered or darkened.
It is mounted like a spark detector, using the same SAM-871 mounting unit, over the duct in the opposite position, so as it will be in front of the spark detector.
Power voltage 24Vdc 50mA.

APPLICATION MANUAL

Control Logic Srl

 

Via Monte Popera 16/43 

 

20138 Milano

 

Tel. (+39) 0254100818

 

C.F./P.IVA IT 10396520156

 

CCIAA Milano 1369273

 

C.S. 26.000€

 

controllogic@controllogic.it

 

Privacy Policy

 

Sales Conditions